Corporate Safety Compliance

OSHA, Ethics, and the Law

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 9781420066494

Category: Law

Page: 336

View: 4382

DOWNLOAD NOW »
Safety and health professionals face potential legal and ethical issues on an almost daily basis. In a landscape of changing responsibilities and new laws, they often make difficult decisions that can result, in hindsight, in the creation of legal issues and liabilities for themselves and their companies. Written by occupational health and safety expert Ton Schneid, Corporate Safety Compliance: OSHA, Ethics, and the Law provides guidance though the maze of legal issues involving OSHA and OSHRC and how to avoid potential legal liability. Tackling safety and ethical issues head on, Schneid explores issues in criminal liability for individuals and corporations under the OSHA Act and state criminal codes. He includes methods for achieving and maintaining OSHA compliance, using specific case studies to illustrate ways to avoid or minimize the impact of legal issues. The text addresses not only OSHA regulations and standards but also the legal aspects up to and including OSHRC decisions on specific issues. Additionally, the author examines the ethical issues involved in many of the legal aspects of the safety issues as well as ethical issues in the day-to-day management of safety and health. The mere mention of the word OSHA scares many people. Often, OSHA has been the much maligned federal agency that was the brunt of attacks from both management and labor organizations. Tom Schneid elucidates the potential legal and ethical issues of the new industrialized workplace. His proactive approach helps you avoid or minimize potential liabilities, where possible, but also gives you the tools to be prepared and knowledgeable in the unique appellate process with OSHA and the OSHRC.

Safety Law

Legal Aspects in Occupational Safety and Health

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 1351130978

Category: Business & Economics

Page: 434

View: 8035

DOWNLOAD NOW »
For new and entry level safety professionals who don't have a clue regarding the legalities involved in the safety and health profession. This book is designed for those in the profession with limited knowledge of legal aspects impacting the function of their jobs.The book starts off with a review of the current federal and state law systems and courts. It focuses on OSHA and the OSHRC, workers compensation, ADA and employment related laws.

Workplace Safety and Health

Assessing Current Practices and Promoting Change in the Profession

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 1439874115

Category: Business & Economics

Page: 227

View: 1110

DOWNLOAD NOW »
Are the tried and true safety practices still effective in the changing workplace? Is there a better way of safeguarding employees from accidents and injuries? In short, why do you perform the safety activities that you do on a daily basis and do they produce the results necessary to keep your safety program and your company competitive in the global market? Answering these questions and more, Workplace Safety and Health: Assessing Current Practices and Promoting Change in the Profession analyzes the current practices and identifies emerging issues and challenges in the safety and health profession. We Need a Game Changer ... A New Way of Achieving a Safe and Healthful Workplace Safety pioneer and educator Thomas Schneid makes a strong case that mandatory compliance with OSHA regulations is only the first step in a safety program. And that, due to globalization and the current emphasis on sustainability, the requirements of the safety profession have changed. He explores new sources of information and guidance for addressing the new and emerging issues created by the current economic situation, globalization, and the changing workplace. He also identifies and analyzes emerging ethical issues within the safety and health profession, then suggests potential solutions. Schneid then examines the basic assumptions and challenges you to assess and evaluate your activities in search of a better and more effective way of achieving the results necessary to be competitive in today’s workplace. Taking a provocative look at the current issues facing the safety profession, he shows you how to view safety activities and actions from a different perspective and see the real impact they have on the lives of others. He gives you the tools you need to go beyond OSHA compliance and develop safety programs that will be effective in the global workplace and create and maintain a safe workplace that eliminates all injuries and illnesses.

Loss Prevention and Safety Control

Terms and Definitions

Author: Dennis P. Nolan

Publisher: CRC Press

ISBN: 9781439833667

Category: Law

Page: 324

View: 3376

DOWNLOAD NOW »
An encyclopedic, A-Z listing of terminology, Loss Prevention and Safety Control: Terms and Definitions addresses the need for a comprehensive reference that provides a complete and sufficient description of the terminology used in the safety/loss prevention field. Fostering clarity in communication among diverse segments within the field and between outside agencies, this book: Provides a reference for the background, meaning, and description of safety and loss prevention terms being used in government, industry, research, and education Contains two-paragraph descriptions of terms, photographs, diagrams, graphs, and tables to aid understanding of the subject, making it more than a dictionary Includes common safety terms, safety engineering aspects, a description of safety organizations, and a list of common safety standards and their scope The field of safety and loss prevention encompasses myriad unrelated industries and organizations, such as insurance companies, research entities, process industries, and educational organizations. These organizations may not realize that their terminology is not understood by individuals or even compatible with the nomenclature used outside their own sphere of influence. And even though fire protection and environmental professionals use identical and similar terminology, their meanings may be slightly different in selected applications. An all-encompassing reference, the book uses OSHA standards and interpretations as guidelines for the definitions and explanations. Drawing from the many areas that influence the terminology, it provides a basic understanding of the terms used in lost prevention and control.

Physical Hazards of the Workplace, Second Edition

Author: Barry Spurlock

Publisher: CRC Press

ISBN: 1315356813

Category: Technology & Engineering

Page: 282

View: 4626

DOWNLOAD NOW »
The recognition and control of hazards in the work environment are the cornerstone of every company’s safety and health plan. Every workplace contains dangers, especially those devoted to technology, machinery, and potentially hazardous material. This book provides you with the information you need to understand the regulations that provide for facility safety and their successful implementation for profitable management of any business.

Workplace Safety and Health

Assessing Current Practices and Promoting Change in the Profession

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 1439874115

Category: Business & Economics

Page: 227

View: 7904

DOWNLOAD NOW »
Are the tried and true safety practices still effective in the changing workplace? Is there a better way of safeguarding employees from accidents and injuries? In short, why do you perform the safety activities that you do on a daily basis and do they produce the results necessary to keep your safety program and your company competitive in the global market? Answering these questions and more, Workplace Safety and Health: Assessing Current Practices and Promoting Change in the Profession analyzes the current practices and identifies emerging issues and challenges in the safety and health profession. We Need a Game Changer ... A New Way of Achieving a Safe and Healthful Workplace Safety pioneer and educator Thomas Schneid makes a strong case that mandatory compliance with OSHA regulations is only the first step in a safety program. And that, due to globalization and the current emphasis on sustainability, the requirements of the safety profession have changed. He explores new sources of information and guidance for addressing the new and emerging issues created by the current economic situation, globalization, and the changing workplace. He also identifies and analyzes emerging ethical issues within the safety and health profession, then suggests potential solutions. Schneid then examines the basic assumptions and challenges you to assess and evaluate your activities in search of a better and more effective way of achieving the results necessary to be competitive in today’s workplace. Taking a provocative look at the current issues facing the safety profession, he shows you how to view safety activities and actions from a different perspective and see the real impact they have on the lives of others. He gives you the tools you need to go beyond OSHA compliance and develop safety programs that will be effective in the global workplace and create and maintain a safe workplace that eliminates all injuries and illnesses.

Discrimination Law Issues for the Safety Professional

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 1439867798

Category: Business & Economics

Page: 438

View: 8285

DOWNLOAD NOW »
Safety professionals communicate, directly and indirectly with a large number of employees and others on a daily basis. While not lawyers, they regularly deal with legal issues. A subset of their responsibilities includes how to discuss safety without crossing the discriminatory line. To do this, they need an understanding of discrimination laws. Discrimination Law Issues for the Safety Professional gives them exactly that. It provides general knowledge of the laws and regulations that offer protection to employees and individuals against discrimination in the workplace. Created by safety expert Thomas Schneid, specifically for safety professionals, the book takes a proactive approach to identifying situations where potential discrimination against an employee or individual may occur, and supplies guidance on how to take immediate action to address the potential discriminatory situation. Schneid also identifies "red flag" situations where potential discrimination against an employee or individual may surface and safety professionals should proceed with caution. Once they can recognize these red flags, they can take immediate action to address the potential discriminatory situation. Although many texts address discrimination in the workplace, very few, if any, educate individuals and employers on how to prevent acts and omissions in the workplace that can result in discrimination from a safety perspective. With the multitude of laws and regulations addressing the prohibition of discrimination in the workplace, often legal actions result from individuals and employers simply not being knowledgeable in the requirements of the law. Written in clear, plain language, not legalese or business speak, this book delineates the procedures that safety professionals need to know in the area of labor, employment, and other laws impacting the safety function.

Creative Safety Solutions

Author: Thomas D. Schneid

Publisher: CRC Press

ISBN: 1482215063

Category: Technology & Engineering

Page: 176

View: 843

DOWNLOAD NOW »
With so much to do and so little time in today's workplace, it's often difficult to bring new ideas and concepts to the attention of employees-let alone make proposed measures regular practice. What's a safety manager to do in order to draw attention to workplace safety issues? Be creative! Creative Safety Solutions presents innovative ways to solve complex safety and health problems in the office or factory. The key to its distinctive approach: motivate employees to "think safety." While offering effective solutions for common health and safety issues, Dr. Schneid also explains how safety specialists can foster creative thinking-ideal for working out situations particular to one's own workplace. Case histories illustrate how the "think safety" methods have brought tremendous improvements to many workplaces throughout the U.S. In addition to fostering active involvement among employees, Creative Safety Solutions also shows how to spread the word among management team members, labor organizations, and vendors. It also details ways to convince management that a safety program is worth the funding and effort. Workplace safety awareness saves money... time... and lives. Creative Safety Solutions will encourage your employees and executives to pay attention-and take part.

Loss Control Auditing

A Guide for Conducting Fire, Safety, and Security Audits

Author: E. Scott Dunlap

Publisher: CRC Press

ISBN: 1439828873

Category: Business & Economics

Page: 255

View: 5302

DOWNLOAD NOW »
As a critical function in monitoring workplace safety, loss control auditing provides an organizational assessment of safety program performance in relation to regulatory requirements and company policies. Principles of quality management dictate that measurement of an activity receives organizational attention and provides an excellent tool for communicating performance to management. A comprehensive audit, rather than individual metrics such as injury rate, helps to determine which aspects of a safety program are functioning well and which ones have room for improvement. Loss Control Auditing: A Guide for Conducting Fire, Safety, and Security Audits is a one-stop resource for both developing and executing a loss control audit program. Written for professionals in the fire service, loss prevention, and safety management as well as those studying the fields, this reference addresses loss control auditing from the perspectives of workplace safety, physical security, and fire risks. The text focuses on the three core areas of an audit: documentation review, physical inspection, and employee interviews. It also presents a three-phase model—pre-audit, audit, and post audit activities—which can be used for all three core areas. It includes detailed information to assist in the development of an effective audit program. The author discusses the foundational elements of an audit program, the written audit program and the audit protocol. Systemic auditing issues of audit scoring, auditor selection and training, audit logistics, and audit frequency are also addressed. The final section of the book discusses the opportunities that can arise in conducting an audit, including how an audit can be used as a training tool and the importance of involving employees in the audit process. The application of the information presented in this volume is facilitated by representative case studies included at the end of each chapter. An up-to-date reference, this text is unique in the depth of material presented and provides an excellent resource on how to develop and execute a loss control audit program.

Safety Performance in a Lean Environment

A Guide to Building Safety into a Process

Author: Paul F. English

Publisher: CRC Press

ISBN: 1439821127

Category: Technology & Engineering

Page: 166

View: 1571

DOWNLOAD NOW »
As changing customer demands and shifting world markets continue to put a strain on businesses in all sectors, your business needs every advantage to stay competitive. Many people may think of Lean processes as suitable only for the manufacturing floor, but that couldn’t be further from the truth. Safety Performance in a Lean Environment: A Guide to Building Safety into a Process demonstrates how Lean tools can eliminate waste in your safety program, making it an important piece not only in keeping your organization safe but also in keeping it globally competitive. Written by safety pro Paul F. English, this book explores tools such as Lean manufacturing, DMAIC processes, and Kepner-Trego problem solving and how to use them to increase efficiency and eliminate waste in safety programs. He goes on to discuss value-based management, a technique identified as a leading business model for any organization wanting to catch "The Toyota Way." These processes help you build, incorporate, and sustain a safety program and understand how to get and maintain a foothold for the safety program in times of change. Here’s what you get: Real safety solutions for a Lean environment Methods for setting up standard work for EHS professionals How-tos for JSA and pre-task analysis to help develop standardized work Tips and tricks that everyone can use to jump start a stalled safety program No book currently on the market discusses Lean manufacturing or Six Sigma processes and links them to the occupational safety or environmental science. Yet these are the areas where the need for Lean processes is becoming acute. English demonstrates how to anticipate paradigm shifts in management models and how environmental health and safety fits into the model. He defines what adds value to the safety and manufacturing process as well as to the customer. These changes may include a change in daily, weekly or monthly metrics that can help or harm a safety program. Defining what adds value to the safety and manufacturing process and the customer helps you understand how to build safety into a process, creating a strong safety program.

Handbook of OSHA Construction Safety and Health, Second Edition

Author: Charles D. Reese,James Vernon Eidson

Publisher: CRC Press

ISBN: 1420006231

Category: Technology & Engineering

Page: 984

View: 320

DOWNLOAD NOW »
A practical guide for eliminating safety and health hazards from construction worksites, the Handbook of OSHA Construction Safety and Health addresses the occupational safety and health issues faced by those working in the construction industry. The book covers a vast range of issues including program development, safety and health program implementation, intervention and prevention of construction incidents, regulatory interpretations, understanding, and compliance, OSHA's expectations, health and safety hazards faced by those working in the construction industry, and sources of information. Highlighting contract liability and multi-employer sites, this second edition features updates for construction regulations, construction job audit, training requirements, and OSHA regulations. It includes new record-keeping guidelines and forms with additional material on focused inspections. Containing updated contact information for the newest agencies, the text also presents a model safety and health program, examples of accident analysis and prevention approaches, sample safety and health checklists, and more than 200 illustrations. Taking a comprehensive approach to construction safety and health, the authors address issues seldom discussed in the construction arena such as perceptions and motivation while also discussing issues gleaned from the safety and health disciplines such as the analyzing of incidents and accident prevention techniques. Including an in-depth discussion of regulations promulgated by the Occupational Safety and Health Administration, the book lays the foundation upon which to build stronger safety and health initiatives, while intervening and preventing jobsite deaths, injuries, and illnesses.

OSHA Compliance Guide

Author: H. Ray Kirk

Publisher: Aspen Publishers

ISBN: 9780735572737

Category: Business & Economics

Page: 718

View: 7435

DOWNLOAD NOW »
Our 17th Edition of the Guide focuses on the most commonly violated OSHA standards for general industry. the OSHA Compliance Guide provides the framework for an effective general safety program. Key topics include: OSHA Overview Chapter, with sections on employer and employee rights and responsibilities, including leased employees, methods to obtain compliance assistance, and more Extensive coverage of the Hazard Communication (Employee Right-to-Know) Standard that explains Material Safety Data Sheet (MSDS) requirements in relation to the Hazard Communication Standard, plus information on Consumer Product Safety Commission labeling of hazardous products Summaries of over 125 OSHA safety standards for general industry, including CFR citations Six commonly used sample written safety plans, both print and CD versions, including an updated Hazard Assessment and PPE Plan that reflects the new rule mandating employers to pay for all required personal protective equipment, plus a list of the limited exceptions to the rule. Plans included in the Guide are: Emergency Action, Fire Safety, General Safety and Health, Hazard Assessment and PPE, Hazard Communication, and Workplace Violence Prevention OSHA training requirements with general discussion of over 50 specific topics Reporting, recordkeeping, and posting requirements, including sample 300 and 301 logs, along with discussion, instructions, exemptions, and a directory listing telephone numbers by state for reporting injuries and fatalities Over 85 safety inspection checklists for general industry Updated information on OSHA-approved state programs, including discussion of the major differences between federal OSHA standards and those of the states with OSHA-approved plans

Occupational Safety and Health Management (Penerbit USM)

Author: Alwi Saad

Publisher: Penerbit USM

ISBN: 9838616427

Category:

Page: 155

View: 7601

DOWNLOAD NOW »
The text of this book contains brief explanations on the rules and regulations on occupational safety and health (OSH), as expressed in Occupational Safety and Health Act (OSHA) 1994 and Factories and Machinery Act (FMA) 1967.The text is divided into 10 modules, beginning with a module on selected issues in OSH, then on the duties of various categories of person, safety, health, welfare, training, enforcement, notification procedures, emergency preparations, and guides to OSH management. Instructions and directives arising from the issues are laid out with supporting legislative provisions.The book is written in simple non-technical and non-legalistic fashion and without lengthy discussions on any topic.The use of English enables readers to find the right flavour in reading the rules and regulations.

Construction Safety and the OSHA Standards

Author: David L. Goetsch

Publisher: Pearson

ISBN: 0134472918

Category: Technology & Engineering

Page: 450

View: 7528

DOWNLOAD NOW »
This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Up-to-date issues and standards relating to construction safety. Construction Safety and the OSHA Standards prepares students to handle all of the safety, health, and compliance responsibilities of even the largest construction projects. In addition to providing current coverage of the latest information and requirements in the OSHA standards for construction (29 CFR 1926, Subparts A through Z plus AA and CC), the text also includes essential safety topics not covered in the standards, such as accident causation theories and ethics and safety. Included are chapter summaries, key terms and concepts, review questions, critical thinking activities, and application activities to ensure understanding of the topics presented in each chapter. The Second Edition includes important new coverage and updating throughout, including a new chapter on innovative approaches to construction safety that go beyond just compliance (new Chapter 3).

Environmental Policy and Public Health, Second Edition

Author: Barry L. Johnson,Maureen Y. Lichtveld

Publisher: CRC Press

ISBN: 1498799477

Category: Law

Page: 506

View: 5022

DOWNLOAD NOW »
As with the first edition, this second edition describes how environmental health policies are developed, the statutes and other policies that have evolved to address public health concerns associated with specific environmental hazards, and the public health foundations of the policies. It lays out policies for what is considered the major environmental physical hazards to human health. Specifically, the authors describe hazards from air, water, food, hazardous substances, and wastes. To this list the authors have added the additional concerns from climate change, tobacco products, genetically-modified organisms, environment-related diseases, energy production, biodiversity and species endangerment, and the built environment. And as with the first edition, histories of policymaking for specific environmental hazards are portrayed. This edition differs from its antecedent in three significant themes. Global perspectives are added to chapters that describe specific environmental hazards, e.g., air pollution policies in China and India. Also there is the material on the consequences of environmental hazards on both human and ecosystem health. Additionally readers are provided with information about interventions that policymakers and individuals can consider in mitigating or preventing specific environmental hazards.

Occupational Health Nursing

Concepts and Practice

Author: Bonnie Rogers

Publisher: Saunders

ISBN: N.A

Category: Industrial nursing

Page: 527

View: 1883

DOWNLOAD NOW »
This text, written by one of the most prominent scholars in the field, provides the reader with a conceptual basis for occupational health nursing practice. It emphasizes the assessment of hazards in the the work environment, the development of programs for prevention of health hazards in the workplace and management of the occupational health unit.

Moral Mazes

The World of Corporate Managers

Author: Robert Jackall

Publisher: Oxford University Press, USA

ISBN: 0199729883

Category: Business & Economics

Page: 294

View: 1079

DOWNLOAD NOW »
This classic study of ethics in business presents an eye-opening account of how corporate managers think the world works, and how big organizations shape moral consciousness. Robert Jackall takes the reader inside a topsy-turvy world where hard work does not necessarily lead to success, but sharp talk, self-promotion, powerful patrons, and sheer luck might. What sort of everyday rules-in-use do people play by when there are no fixed standards to explain why some succeed and others fail? In the words of one corporate manager, those rules boil down to this maxim: "What is right in the corporation is what the guy above you wants from you. That's what morality is in the corporation." This brilliant, disturbing, funny look at the ethos of the corporate world presents compelling real life stories of the men and women charged with running the businesses of America. This anniversary edition includes an afterword by the author linking the themes of Moral Mazes to the financial tsunami that engulfed the world economy in 2008.